行业新闻

原文
Boiler (or chiller) Water flow balance In the boiler room (or cold room), the general parallel installation of several units, as between the various units with different resistance, causing inconsistencies in the flow through the unit, the unit can not play the installed capacity of maximum output. At this point should be in each boiler (or chiller) to install balancing valve, so that each unit can be designed with a capacity of each unit to ensure safe and normal operation. Connect multiple chiller cooling tower, cooling tower should be installed on each balance valve
原文来自：http://www.zhenxingfa.org

是由上海丰企阀门有限公司提供的阀门新闻，中文译文仅供参考，以下提供站内导航搜索：

中国针型阀网针型阀产品针型阀知识针型阀厂商针型阀博客针型阀行业新闻

译文：
在锅炉房（或冷水机房）中，一般并联安装几台机组，由于各机组之间具有不同的阻力，引起通过各机组的流量不一致，使机组不能发挥装机的最大出力。此时应在每台锅炉（或冷水机组）处安装平衡阀，使每台机组都能获得设计流量，保证每台机组安全、正常运行。冷水机组连接多台冷却塔时，每台冷却塔也应安装平衡阀

更多新闻：